Stool mould

Stool mould

Description

After confirming the number of cavities, the plastic stool molds for household use are placed in the cavity, that is, the orientation of the cavity, the placement of the cavity touches the mold scale, the planning of the pouring system, the balance of the pouring system, and the core (slider) ) Institutional planning, inserts and models

  • Product details page 1

  • Product details page 2

  • Additional Product Information

  • product manual

After confirming the number of cavities, the household plastic stools for daily necessities mold are placed in the cavity, that is, the orientation of the cavity, the placement of the cavity touches the mold scale, the planning of the pouring system, the balance of the pouring system, and the core (slip) (Block) organization planning, insert and core planning, heat exchange system planning, these issues are related to the selection of parting surface and gate orientation, so in the specific planning process, necessary adjustments must be made to achieve More perfect planning.

The gating system planning includes the selection of the main runner, the confirmation of the cross-sectional shape and size of the runner, the selection of the orientation of the gate, the confirmation of the gate method and the cross-section size of the gate. When using a point gate, in order to ensure the fall of the runner Attention should also be paid to the planning of the gate device, the gate device and the gate mechanism.

When planning the pouring system, the first step is to choose the orientation of the gate.

The planning of the cooling system is a relatively complicated task, that is, the cooling effect and the uniformity of the cooling must be considered, and the influence of the cooling system on the overall structure of the mold must be considered.

The demolding gradient is directly related to the demolding and quality of plastic products, that is, whether the injection can be performed smoothly during the injection process: the demolding gradient is sufficient; the gradient must be in accordance with the plastic mold or the mold surface of the plastic product Habits; whether it will affect the accuracy of appearance and wall thickness scale; whether it will affect the strength of a part of plastic products.


Related News

Product Recommended

  • Thin wall products
  • Electrical mould
  • Cup mould
  • Custom Turnover Box M...
  • Paint bucket mould
  • Pallet mould