Tissue box mold processing as a mold processing technology, after its manufacture or completion, more or less will appear a little bad. So how to deal with this situation? Today, the editor of Taizhou Dacheng Plastic Mould Co., Ltd. came to analyze the cause of this situation and how to deal with it. I hope it can be helpful to everyone. Let ’s take a look Right.
The main causes of dents are the following:
1) Insufficient mold cooling, insufficient cooling time will cause serious deformation.
2) Insufficient pressure in the mold will also present this situation.
3) The thickness of each part of the product is different.
In the face of this situation, the overall treatment method: reduce the barrel temperature and mold temperature, forced cooling in the place where the dents occur, make up the side of the dents, and control the difference in planned product thickness.
Second, the product is albino.
The main causes of product whitening are as follows:
1) Excessive fit pressure.
2) Poor demolding.
In the face of this situation, the overall processing method: When planning the tissue box mold, pay attention to the slope of the demolding. When manufacturing the mold, make sure that the cavity of the mold remains bright, and the injection pressure should be immediately reduced in real-time processing.
There are many conditions for the bad phenomenon in the processing of the tissue box mold. We hope that we will be careful in the process of operation and strive to make perfect works. The above reasons for the situation in the processing of tissue box molds are analyzed here by the editor of Taizhou Dacheng Plastic Mould Co., Ltd. I believe that everyone has already understood it. If there are other things that do not understand, or if we have a sense of our products Interest, you are welcome to inquire, we will serve you wholeheartedly.